 |
Pro-Tec Aero-Blend petroleum products have been formulated specifically for the aircraft engines. It is an exclusive metal-treating mixture designed to blend and circulate with the oil of the aircraft reciprocating engine in order to reach the engine's metal surfaces. Aero-Blend helps improve operating temperatures, prevent sticky rings and valves by reducing sludge accumulation, extend the life of the engine, protect the oil-deprived metal parts during start-up, reduce wear on valves and valve stems, prevent acid corrosion. Aero-Blend is a unique metal treatment which chemically treats the internal metal surfaces of the aircraft engines to form a protective single molecule depth of lubricant coating, hereby reducing thermal build up. Aero-Blend's conditioning compound works under extreme temperatures, yet it does not contain solid particles such as moly, teflon, lead, etc. It will not settle, separate or "sludge out." Aero-Blend treats the internal metal surfaces of the engine by chemically ionizing with the metal creating a protective barrier less than one molecule thick. The result is a smoother running engine, with less friction related wear and heat. And since this treatment is residual, the engine oil does not have to be in continuous circulation for Aero-Blend to provide its protection. This also protects the engine components during cold starts. FAA APPROVED Aero-Blend has been subjected to rigorous testing by engine manufacturers and the University of Illinois, meeting the requirements of the FAA. Results of these tests have yielded approval of Aero-Blend by the FAA and the issuance of a Supplemental Type Certificate (STC SE1445SO). Test results confirm that Aero-Blend reduces wear on moving parts in the engine and that in several areas in which wear is normally expected to be excessive, the measurable wear was reduced to zero! Test conclusions are based on the performance and teardown inspection of the required engine endurance test outlined in FAA AC 20-24A, during which Aero-Blend was used to treat the moving metal parts of the engine. APPLICATION: Add 1 1/2 - 2 oz. of Aero-Blend per quart of petroleum or synthetic aviation oil in the aircraft reciprocating engine. Aero-Blend should be used at every oil change. |
